Wollert Building
Inspections
★★★★★ 4.8 on Google · 570+ reviews

Building inspections in Wollert

Wollert is one of Melbourne's fastest growing suburbs, and almost everything here is a new build on reactive basalt clay. We inspect it before the mistakes get covered up.

  • Instant price online
  • Report within 24 hours
  • Registered and insured
  • 4.8 stars, 570+ reviews
  • Inspecting since 2014
  • Thermal camera and drone
  • Defects tied to the standard
  • Same-week bookings
Get your Wollert inspection priceInstant price. No obligation. Same-week bookings.

Fully licensed & accredited

What we inspect

Inspections we carry out in Wollert

All 16 inspection services →

Owner Inspections inspectors reviewing a report together
Why Wollert owners choose us

Independent. Licensed. Insured.

  • Independent of your builder, and registered with the Building and Plumbing Commission
  • Every item measured against the clause or tolerance it fails, not an opinion
  • Moisture meter and thermal imaging where a reading settles the question
  • Your report lands the next day, ready to send to the site supervisor
On site in Wollert

Recent Wollert inspections

Weighted to the work Wollert books most: construction stage inspections through slab, frame and lock-up, then pre-handover. Pre-purchase, pest and defect investigation photos come from neighbouring suburbs, and each caption says where. Client addresses withheld.

Door to frame clearance outside the 2mm to 5mm range, so it needs adjusting, found during a building inspection in Wollert
Door to frame clearance outside the 2mm to 5mm range, so it needs adjusting
Coloured concrete finished in noticeably different shades across the paving, found during a building inspection in Wollert
Coloured concrete finished in noticeably different shades across the paving
Blocking missing at the steel beam to support the skirting later on, found during a building inspection in Wollert
Blocking missing at the steel beam to support the skirting later on
Uneven gaps between the door frames and leaves, found during a building inspection in Wollert
Uneven gaps between the door frames and leaves
Less than the 15mm clearance needed between the lintel and the window frame, found during a building inspection in Wollert
Less than the 15mm clearance needed between the lintel and the window frame
Gas pipe touching a cold water pipe, where 25mm of separation is required, found during a building inspection in Wollert
Gas pipe touching a cold water pipe, where 25mm of separation is required
Return air void needing a clean, found during a building inspection in Wollert
Return air void needing a clean
Weep holes sitting too close to the ground, below the required clearance, found during a building inspection in Wollert
Weep holes sitting too close to the ground, below the required clearance
Nogging spacing around the meter box exceeds 1,350mm, so another is needed, found during a building inspection in Wollert
Nogging spacing around the meter box exceeds 1,350mm, so another is needed
Hebel cladding not finished, found during a building inspection in Wollert
Hebel cladding not finished
How it works

How a Wollert inspection works

Six steps from the first enquiry to the answers you need after the report lands.

  1. 01

  2. 02

  3. 03

  4. 04

  5. 05

  6. 06

Reviews

What Wollert owners say about their inspection

Owner Inspections holds 4.8 from 570+ Google reviews across Victoria, New South Wales and Queensland. Read them on Google →

T Tan Hieu H. Myrtleford Street, Wollert ★★★★★
The report is very thorough, picture and video are clear and detailed. Captions and explanations are also straightforward.
Lock-up (pre-plaster)
R Rula K. Ranterra Road, Wollert ★★★★★
Professional team, easy process and thorough inspection, thank you very much.
Frame inspection
M Matt D. Lavignon Road, Wollert ★★★★★
Fantastic service. Burak and the Owner Inspections team are knowledgeable, responsive, and great communicators. We had some delays with our slab pour but the team were able to arrange inspection with only one day's notice. They provided a thorough but easy to read report within moments of completing their inspection.
Slab pre-pour
T Tanya N. Barrhill Boulevard, Wollert ★★★★★
Couldn't ask for better service. Burak's inspections and reports are always thorough and detailed and he never misses anything, thank you.
Pre-handover (PCI)

Verified client reviews collected through our inspection system once each report was delivered. The street, service and month come straight from the Wollert job record.

Service area

Inspections across Wollert and Wyndham

We inspect every estate in Wollert 3750 and the surrounding suburbs of Epping North, Epping, Craigieburn, Donnybrook, Mernda, Doreen and Beveridge. Our Melbourne west inspectors are on site in Wollert most weeks, so travel never adds to the price.

  • Aurora
  • Arramont
  • Lyndarum North
Guides

Guides for Wollert owners and buyers

All guides →

Local guide

Building, buying and investing in Wollert

The ground, the planning and the numbers our inspectors work with on every Wollert job, updated as the suburb fills in.

Market figures from realestate.com.au and the ABS, updated August 2026.

Book a building inspection in Wollert

Instant online pricing, or talk to the booking team on 1300 471 805.

FAQ

Building inspections in Wollert: common questions

How much does a building inspection cost in Wollert?

It depends on the service and the size of the home. The quote form prices the job instantly with no obligation, so you see the figure before you commit to anything.

How soon can you inspect a property in Wollert?

Usually within the same week, and often sooner for stage inspections where a pour or lock-up date has moved. Tell us the date you are working to when you book.

When do I get the report?

Within 24 hours of the inspection. Every defect is photographed, described in plain terms and tied to the clause or tolerance it fails, so you can forward it to your builder as it is.

Which inspections do Wollert owners book most?

Construction stage inspections, because most of the suburb is still being built, followed by pre-handover. Pre-purchase and timber pest come in on the resale of homes built in the last twenty years.

Are your inspectors registered?

Yes. Owner Inspections is registered with the Building and Plumbing Commission, formerly the VBA, and carries professional indemnity and public liability insurance. Registration number CDB-U 53425.

Which standards do you inspect against?

AS 4349.1 for pre-purchase, AS 4349.3 for timber pests, the National Construction Code and the relevant Australian Standards for construction stages, and the Guide to Standards and Tolerances 2015 for workmanship.

Can my builder refuse to let you on site?

No. You are entitled to have an independent inspector attend your build. We give reasonable notice and work in with the site supervisor and the site's safety requirements.

Do you inspect on the weekend?

We inspect Monday to Saturday. Stage inspections have to fit the build sequence, so the constraint is usually the site's progress rather than the day of the week.

What is not included in an inspection?

We do not test or energise electrical, gas or plumbing systems, appliances, heating and cooling, pools or automatic garage doors, and we cannot report on anything concealed or that we could not safely reach. The report lists what was inaccessible.

Do you cover the rest of the northern corridor?

Yes. We inspect across Epping North, Epping, Craigieburn, Donnybrook, Mernda, Doreen and Beveridge, and elsewhere in the City of Whittlesea.

What if the builder will not fix what the report found?

Put it to them in writing with the report attached. If that fails, the path in Victoria is the Building and Plumbing Commission's dispute resolution service, formerly DBDRV, and then VCAT's Building and Property List.

Is a defect report enough to take to VCAT?

No. A defect investigation report is addressed to the owner and the builder. VCAT evidence requires an expert witness report prepared to the tribunal's expert evidence requirements, which is a different document.

Why does the soil in Wollert matter to my inspection?

Wollert sits on reactive basalt clay that swells in winter and shrinks in summer. That movement is behind most structural cracking here, which is why the slab pre-pour inspection and the drainage details at handover carry so much weight.

CallGet a Free Quote